| Description |
Bag
Size |
Coverage
Per Bag |
| Cements |
Colton
California Portland Common Cement
Type II Portland Cement is the most commonly used in general
construction for everything from sidewalks to high-rise buildings.
Specifications: ASTM C-150 Type I Low Alkali; Cal trans Section
90-2 (designate CHC) |
94lbs. |
N/A |
Colton
California Portland Plastic Cement
Plastic Cement is used for portland cement plaster and stucco applications. Called plastic cement because it has a high degree of plasticity, another term for workability. Specifications: UBC 25-1; ASTM C926 |
94lbs. |
N/A |
Riverside
Plastic Cement
Plastic Cement is used for portland cement plaster and stucco applications. Called plastic cement because it has a high degree of plasticity, another term for workability. Specifications: ASTM-C-1328; UBC 97 Sec. 21 & 25; City of Los Angeles Approved |
94lbs. |
N/A |
Riverside
White Cement
Comparable to Type I and Type III Cement. Commonly used for:
Swimming pool plaster, roofing tile, pre cast curtain walls,
architectural panels, terrazzo surfaces, stucco, cement paint,
decorative grouts and mortars. Specifications: ASTM C-150 Type
I Low Alkali; Federal SS-C 1960/3 |
94lbs. |
N/A |
Premium Pre-Mixed Concrete
A just add water, pre-mixed concrete used for making concrete walkways and footings. |
90lbs. |
2/3 cu. ft. |
| Mortars
& Thinsets |
High
Spec Type S Grey Mortar
A Type S pre-mixed mortar used for laying block, brick and stone. |
94lbs. |
N/A |
Spec
Mix Medium Tan Mortar
A Type S pre-mixed mortar used for laying block, brick and stone. |
94lbs. |
N/A |
Orco
MAC Grey Mortar V.B.M.
This mortar is specifically designed for installing artificial stone veneer. The extended working time improves production and quality. The high bond strengths of Mac Mortar (V.B.M.) make it an excellent mortar for adhering artificial stone veneers. Also available is poly - V.B.M. that includes a dry polymer. |
94lbs. |
N/A |
Orco
Type S MAC Tan Mortar
Mac Mortar is used for bonding concrete block, clay brick, stone and other masonry products. It is suitable wherever a high quality bonding mortar meeting A.S.T.M. C-270 is required. |
94lbs. |
N/A |
Floor
& Wall Grey Thinset
Specially Formulated for the installation of ceramic, mosaic, quarry tiles and dimension stone (absorptive, semi-vitreous and vitreous) tiles for service in commercial and residential use on both wall and floor installations. Specifications: ANSI 118.1; CTI 64-1. |
50lbs. |
90-100
sq. ft. with
1/4"x1/4" notch trowel |
Floor
& Wall Tan Thinset
Specially Formulated for the installation of ceramic, mosaic, quarry tiles and dimension stone (absorptive, semi-vitreous and vitreous) tiles for service in commercial and residential use on both wall and floor installations. Specifications: ANSI 118.1; CTI 64-1. |
50lbs. |
90-100
sq. ft. with
1/4"x1/4" notch trowel |
Muddox
Fireclay Mortar
Fireclay mortar is used when building ovens or fireplaces with firebrick. Mix one part fireclay mortar, to two parts cement, to six parts sand. |
50lbs. |
N/A |
| Gravels |
3/8" Crushed Pea Gravel
This rock is typically mixed with sand & cement for concrete or an inexpensive ground cover. |
75lbs. |
1/2
cu. ft. |
3/4" Crushed Rock
This rock is typically mixed with sand & cement for concrete or an inexpensive ground cover. |
75lbs. |
1/2
cu. ft. |
| Sands |
Silica
Blast Sand
Available in 16, 20, 30, 60 and 90 grit for sand blasting or mixed with plastic cement for fine grit mortar. |
100lbs. |
N/A |
Washed
Sand
This sand is typically mixed with Plastic Cement for mortar and grout. |
75lbs. |
3/4
cu. ft. |
White
Pool Sand
This white crushed marble sand is void of dirty specks common in other pool sands. Ultra White Marble Sand is 98% pure and creates a very white interior pool finish giving the pool water a crisp blue refreshing look. |
100lbs. |
N/A |
| Waterproofing |
Merlex
Grey Super Blockade
One-component cementitious waterproof coating for concrete and masonry. Recommended uses include protecting cement plastered walls, concrete foundations, block walls, ponds, water features, brick structures, and any other concrete, cement or masonry surface subject to damage from moisture. |
50lbs. |
200
sq. ft.
@ 1/16" Thick |
Thoroseal
Grey
Thoroseal is highly resistant to standing water or wind driven
rain and is intended for use on vertical, overhead and non-traffic
bearing surfaces. Mixing Acryl 60 with Thoroseal is recommended
when retaining water. |
50lbs. |
1st coat: 225
sq. ft.
2nd coat: 450 sq. ft. |
| Miscellaneous |
Asphalt
Patch
A temporary patch for asphalt. |
60lbs. |
N/A |
Agricultural
Gypsum
This product is an excellent soil conditioner for agriculture and landscape applications. It loosens clay and compacted soil, improves air and water penetration, counteracts salt damage by displacing sodium, adds sulfur and calcium to the soil, increases effectiveness of fertilizers by improving soil structure. |
50lbs. |
N/A |
Type
S Lime
When mixed with portland cement, sand, and water, it is the key ingredient
in the mixing of highly plastic workable mortar needed for durable, water resistant
masonry. |
50lbs. |
N/A |
Western
Large Salt
Water softener salt crystals 1/8" to 3/8" in size are broadcast onto the fresh concrete. A roller is then used to press the salt crystals into the concrete. The surface is latter washed, dissolving the salt and leaving small holes. |
50lbs. |
N/A |
